|
The basic requirements for high accuracy
- Robust, distortion-resistant module
- Consequent lay-out with regard to thermal stability
- Sliding guideways wherever required
- Roller guideways wherever possible
- Axes drives in the centre of friction
- Measuring systems optimally positioned with regard to the measuring technique
- Absolutely smooth stroke reversal
Working area
Range of adjustment X, Y: 700 x 500 mm
Vertical adjustment of grinding head (W):
500 mm
Clearance between grinding motor (45S) and table: 0-600 mm
Distance between the spindle center and the column: 750 mm
max. diameter ground
(with grinding wheel 100 mm):
- without extension plate: 230 mm
- with extension plate: 360 mm
Table
Working surface: 770 x 630 mm (S55 view technical Data)
Control
S45-400 with CNC control GE-Fanuc 300i
|
 |
Downloads
|
|
 |
A clever CNC control
If you appreciate user friendly menu-programming and insist on the advantages of ISO/DIN programming, then the HAUSER product will be the right choice. As standard, the X,Y, C, U and W axes are CNC controlled. Based on the GE-Fanuc 300i with integrated PC, we have created HAUSER SOFTWARE CYCLES, ensuring that the control will perfectly cover all the special requirements of jig grinding. In general, the following HAUSER user software with menu programming support is at your disposal:
- Bore grinding cycle U, Planetary grinding G100
- Bore grinding cycle U, Chop grinding G120
- Contour grinding cycle X-Y G140
- Pocket grinding cycle G160
- Shoulder grinding cycle (carried out by means of the CNC W axis) G105
- MSS assistance for Grinding wheel calibration
G190/G195/G197
- Dressing cycle assistance (only possible with dressing cycle) G185
|
|
